In 1952, the French Navy created a unit of combat divers and discovered that no watch on the market met their needs. The watch that answered their requirements set the template for every professional dive watch that followed.
The nageurs de combat
After the Second World War, several navies built on wartime experience to create units of combat divers. In France, the Navy established a unit of nageurs de combat, combat swimmers, based at Saint-Mandrier near Toulon on the Mediterranean coast. Their tasks were to carry out underwater reconnaissance, place explosives on ships and harbor defenses, and conduct other covert missions. They used the newly developed Aqua-Lung and closed-circuit oxygen rebreathers.
The unit was led by two officers with remarkable backgrounds. Captain Robert Maloubier, known as Bob, had served in the Special Operations Executive during the war, parachuting into occupied France to work with the Resistance. Lieutenant Claude Riffaud was a naval officer and diver. Together, they set about equipping their men.
The problem of time
For combat divers, time was critical. They needed to know how long they had been underwater to manage their oxygen supply, which in closed-circuit rebreathers was limited and dangerous to overuse. They needed to coordinate their movements and timings with other divers and with surface units. And they needed to read their watches clearly in the dark, murky waters of harbors at night.
Maloubier and Riffaud tested the watches available to them and found them inadequate. Some were not truly waterproof at depth. Others were hard to read in the dark. None had a reliable way of measuring elapsed time underwater.
A list of requirements
The two officers drew up a list of what their divers needed. The watch should have a black dial with large, clearly distinguishable luminous markers, so that the time could be read instantly underwater. It should have a rotating outer bezel, marked in minutes, that could be set to the start of a dive and would show elapsed time at a glance, and that bezel should be lockable so it could not be moved accidentally. It should be waterproof to a significant depth. It should be automatic, to avoid frequent use of the crown. And it should be robust.
They approached French watchmakers, who declined to take on the project. The solution came from Switzerland.