WatchShop Wiki
Articles · The Hamilton Electric and the First Battery WatchWatchShop Wiki

Hamilton Electric · chapter 7

The watchmakers’ nightmare

A new skill

When the Hamilton Electric was introduced, watch repairers across America were trained in mechanical watches. They knew how to clean, oil and adjust a mainspring, a gear train and a balance with its escapement. The Hamilton Electric presented them with something new: a coil, magnets, contact wires and a battery. Many repairers did not understand how the watch worked and were reluctant to touch it.

Delicate contacts

The contact wires were the main source of trouble. They had to be adjusted with great precision, and a slight misalignment could stop the watch or make it run erratically. Repairers who tried to adjust them without proper training often made the problem worse. Hamilton set up training programs and published service manuals, but many watches suffered from poor servicing.

The 505 improvement

Hamilton’s improved movement, the 505, introduced in 1961, addressed many of these problems. It moved the contact system away from the balance and made it more robust and easier to adjust. Watches with the 505 movement were more reliable, but the reputation of the electric watch had already been damaged.

Specialists today

Today, a small number of specialists around the world restore Hamilton electric watches. They have developed techniques for adjusting the contacts, rewinding coils and adapting modern batteries to the old movements. Thanks to their work, many of these pioneering watches can still be worn.

The Hamilton Electric and the First Battery Watch · Repairing them7