Balance spring · chapter 3
The watch grows a minute hand
The balance spring did more than improve accuracy. It changed the look of the watch, the way people carried it and the way they thought about the minute.
From quarter hours to minutes
With a balance spring, a good watch of the late 1670s could keep time to within a few minutes a day, and the best did considerably better. Contemporaries spoke of an improvement roughly tenfold. That made a minute hand worth having for the first time. Within a few years, English and French makers were fitting watches with two concentric hands, hours and minutes, on a dial marked with sixty minute divisions. The watch face that we know today, with its long and short hands turning around a common center, was born in this period.
The regulator
A balance spring also made it possible to adjust a watch. By changing the effective length of the spring, a watchmaker could make the balance swing faster or slower. Makers added a regulator: a small device with two pins embracing the spring, moved by a toothed disc or a lever, so that the rate could be fine-tuned. English watches of the period often show a small silver disc marked with numbers on the back plate, part of the regulating system devised by Tompion and his contemporaries.
A golden age in London
The decades after 1675 were a golden age for English watchmaking. Thomas Tompion, his partner and successor George Graham, and makers such as Daniel Quare built watches and clocks of a quality admired throughout Europe. Graham perfected the cylinder escapement in the 1720s, which allowed flatter watches. Quare is often credited with an early repeating mechanism. Tompion, sometimes called the father of English clockmaking, was buried in Westminster Abbey in 1713, a remarkable honor for a craftsman, and Graham was later laid to rest in the same tomb.
The waistcoat and the pocket
Fashion played its part too. In 1666 King Charles II introduced a new style of men’s dress at the English court, including a long vest, the ancestor of the waistcoat. Pockets in men’s clothing became more common, and the watch moved from the neck chain into the waistcoat pocket, where it would stay for two and a half centuries. A more accurate watch was also a more personal one, consulted often and carried close.
The limits that remained
The balance spring did not solve every problem. Its stiffness changes with temperature, so a watch ran differently in a warm room and on a cold street. The verge escapement still interfered with the balance at every swing. Oil degraded. Positional errors made a watch behave differently lying flat or standing up. Solving these issues would occupy the next two centuries, from John Harrison’s marine timekeepers to Abraham-Louis Breguet’s overcoil and the twentieth-century invention of alloys like Elinvar and Nivarox. Even today, the balance spring is the heart of the watch, and some of the most advanced research in the industry, such as springs made of silicon, still focuses on it.
A continuous line
Open the caseback of any mechanical watch made today, and you will see a balance wheel swinging back and forth, held by a tiny spiral spring. The shape and materials have changed, but the principle is the one Huygens published and Hooke claimed in 1675. Few inventions have lasted so long with so little change.
Every mechanical watch made today still beats to the rhythm worked out in Paris and London in 1675.
The road to precision
- 1583Galileo’s pendulum
Traditionally dated observation of a swinging lamp in Pisa.
- 1656Pendulum clock
Huygens designs it; Coster builds it.
- c. 1658Hooke’s claim
Year Hooke later gave for his first spring experiments.
- 1666The waistcoat
Charles II’s new court dress brings pockets.
- 1675Spiral spring
Huygens publishes; Tompion builds Hooke’s watch.
- 1678Hooke’s law
Ut tensio, sic vis is revealed.