Seiko trials · chapter 6
Two factories, one goal
Seiko did not send one team to Switzerland. It sent two, and the rivalry between them was as fierce as the contest with the Swiss.
A deliberate rivalry
By the 1960s, Seiko’s watch production was divided between two companies within the same group. Daini Seikosha worked in Kameido, in eastern Tokyo. Suwa Seikosha worked in the mountain town of Suwa, in Nagano prefecture. Each had its own engineers, its own movements and its own pride. The group’s management encouraged them to compete, believing that internal rivalry would drive both to improve faster than either would alone.
When Seiko decided to enter the Swiss observatory competitions, both factories prepared movements. They shared the same goal, to prove that Japanese watchmaking could match the best in the world, but they pursued it separately. Each studied the published results of the Swiss contests, analyzed the scoring formula and worked out where points were won and lost. Each trained adjusters to prepare the movements by hand.
Learning the scoring
The observatory competitions did not simply reward a watch that kept good time on average. The scoring formula weighed several factors: how much the rate changed between positions, how much it changed with temperature, how stable it was from day to day and how well it returned to its original behavior at the end of the test. A movement could keep excellent average time and still score poorly if it behaved differently lying flat and standing up. Seiko’s engineers had to understand these criteria in detail and design and adjust their movements accordingly.
The work of the adjusters
As in Switzerland, the decisive work was done by adjusters. Seiko’s adjusters spent weeks on each competition movement, poising balances, shaping the terminal curves of balance springs and testing the movements in different positions and temperatures. They had no long tradition to draw on, as the Swiss régleurs did, so they combined careful study of published methods with systematic experimentation. Some of them became highly respected within the company, and their methods fed back into the production of Grand Seiko and King Seiko watches.
Materials and design
Seiko’s engineers also worked on the movements themselves. They developed balance springs from improved alloys, refined the geometry of the escapement and experimented with higher frequencies, which made the rate of the watch less sensitive to disturbances. Each improvement was tested and measured. The approach was thoroughly industrial: a problem was identified, a solution designed, tested and adopted if it worked.
The results at home
The rivalry between Suwa and Daini had a lasting effect on Seiko’s products. Grand Seiko, made at Suwa, and King Seiko, made at Daini, competed for the title of Japan’s finest watch. Both improved rapidly through the 1960s, and both benefited from the knowledge gained in the observatory competitions. Collectors today still debate which of the two factories made the better watches.