Quartz · chapter 6
Inside a quartz watch
A quartz watch looks simple from the outside. Inside, it combines a vibrating crystal, a tiny computer and a miniature motor.
The crystal
At the heart of a quartz watch is a small piece of quartz, usually cut in the shape of a tiny tuning fork, sealed in a metal capsule. In most watches, the crystal vibrates at 32,768 times per second when an electric current is applied. This frequency was chosen because it is a power of two, two to the fifteenth power, which makes it easy for electronic circuits to divide it down to exactly one pulse per second. The Seiko Astron’s crystal used a lower frequency, 8,192, also a power of two.
The circuit
An integrated circuit keeps the crystal vibrating and counts its vibrations. Every 32,768 vibrations, it sends a pulse to the motor. The circuit can also compensate for small variations in the crystal’s frequency. Early quartz watches used several separate electronic components, but the integration of circuits onto a single chip was crucial in making quartz watches small, cheap and reliable.
The motor
In an analog quartz watch, the pulse from the circuit drives a tiny stepping motor, called a Lavet motor, which turns a small rotor by a fraction of a turn. Through a train of gears, the rotor turns the hands. That is why the seconds hand of most quartz watches jumps once a second rather than sweeping smoothly.
The battery
The whole system runs on a small battery, which in most modern quartz watches lasts several years. The power consumption of quartz watches has been reduced enormously since the 1970s, thanks to improvements in circuits and motors.
Accuracy
A typical quartz watch is accurate to within about fifteen seconds a month, far better than any mechanical watch. High-accuracy quartz watches, which compensate for the effects of temperature on the crystal, can be accurate to within a few seconds a year.