WatchShop Wiki
Articles · Fifty Fathoms and the Modern Dive WatchWatchShop Wiki · Vol. 2

Fifty Fathoms · chapter 7

What makes a true dive watch

From specification to standard

The requirements defined by Maloubier and Riffaud in 1952 were eventually reflected in international standards. In 1996, the International Organization for Standardization published ISO 6425, a standard for divers’ watches, which built on earlier national standards. It sets out the requirements a watch must meet to be called a diver’s watch.

The requirements

Among other things, ISO 6425 requires that a diver’s watch have a means of measuring elapsed time, typically a unidirectional rotating bezel, that it be legible at a distance of twenty-five centimeters in total darkness, that it be water-resistant to at least one hundred meters with a safety margin, and that it resist shocks, magnetism and salt water. Each watch must be tested individually for water resistance.

Echoes of 1953

Many of these requirements echo the specifications of the Fifty Fathoms: a timing bezel protected against accidental movement, strong luminous markings, robust water resistance and resistance to magnetism. The standard codified what the pioneers of the 1950s had learned through experience.

Beyond the standard

Many modern dive watches exceed the minimum requirements of the standard by a wide margin, offering water resistance of several hundred or even thousands of meters. Few divers ever need such capabilities, but the numbers have become part of the appeal of dive watches, which are worn far more often on land than in the sea.

Fifty Fathoms and the Modern Dive Watch · Standards201