WatchShop Wiki
Articles · The Hamilton Electric and the First Battery WatchWatchShop Wiki · Vol. 2

Hamilton Electric · chapter 2

How the electric watch worked

Still a balance wheel

The Hamilton Electric was not an electronic watch in the modern sense. It still used a balance wheel, like a mechanical watch, swinging back and forth at a regular rate. What changed was the way the balance was kept in motion. Instead of a mainspring and escapement, the Hamilton used a battery and an electromagnet.

The coil and the magnets

A small coil of wire was mounted on the balance wheel itself. Near it, fixed to the movement, were permanent magnets. Each time the balance swung, a set of fine contact wires closed an electrical circuit for a brief moment, sending a pulse of current from the battery through the coil. The coil became an electromagnet and was pushed by the fixed magnets, giving the balance a small impulse. The balance then swung freely until the next pulse.

Driving the hands

The balance in turn drove the hands. A small mechanism connected to the balance advanced a wheel by one tooth at each swing, and this wheel drove the gear train that turned the hands. In effect, the Hamilton Electric reversed the logic of a mechanical watch: instead of the gear train driving the balance, the balance drove the gear train.

The battery

The watch was powered by a small battery developed specially for it, about the size of a button, which lasted about a year. Changing the battery was simple compared with the daily ritual of winding, and the owner could forget about winding altogether. Hamilton promoted this as a revolution in convenience.

The weak point

The contact wires, however, were a weakness. They were extremely fine and delicate, and they had to make and break the electrical circuit thousands of times an hour, every hour, for years. They could be bent or misaligned by a knock or by careless servicing, and the sparking at the contacts caused wear. Many watchmakers, trained in mechanical watches, were unfamiliar with the new technology and found the watches difficult to adjust and repair. Problems with reliability affected the watch’s reputation.

The 505

Hamilton responded by improving the design. In 1961, it introduced the Electric 505 movement, which moved the contact system away from the balance and made it more reliable and easier to service. The 505 was a significant improvement, but by then the electric watch faced a new rival.

The Hamilton Electric and the First Battery Watch · The watch232