Lever escapement · chapter 3
From curiosity to standard
For decades after Mudge, the lever escapement remained a rarity. A string of later makers in England, France and Switzerland gradually turned it into the mechanism of the mass-produced watch.
Josiah Emery
One of the first makers to take up Mudge’s idea was Josiah Emery, a Swiss-born watchmaker working in London. In the 1780s, Emery made a small series of lever watches, perhaps a few dozen, of exceptional quality. One was made for Count Brühl, a Saxon diplomat in London who was a passionate patron of precision timekeeping. Emery’s watches proved that the lever could work in practice, but they were very expensive.
The English lever
In 1791 the Liverpool watchmaker Peter Litherland patented a rack lever escapement, a related design that made the lever easier to manufacture. Liverpool and its surrounding towns, such as Prescot, were by then major centers of English watch production. During the early nineteenth century, English makers developed the table-roller lever, with pointed escape-wheel teeth, which became the typical escapement of good English pocket watches. These English lever watches were robust, accurate and highly regarded, particularly in the British Empire and the United States.
Breguet’s contribution
In France, Abraham-Louis Breguet adopted the lever in many of his watches from the late eighteenth century onward and refined it with his usual inventiveness. Breguet’s workshop helped make the escapement respectable among European makers, and his watches spread its reputation among the elite customers who set fashions.
The Swiss lever
The decisive step came in Switzerland in the nineteenth century. Swiss makers developed a lever escapement with club-shaped teeth on the escape wheel, in which the impulse was shared between the teeth and the jeweled pallets. A key innovation was draw: the pallets were angled so that the force of the escape wheel pulled the lever firmly against its banking pins, holding it safely out of the way while the balance swung freely. Georges-Auguste Leschot, who worked for Vacheron Constantin, played an important role in standardizing lever escapement parts so that they could be made by machine.
Machines and interchangeable parts
The Swiss club-tooth lever was ideally suited to industrial production. It was tolerant of small variations, could be made with machine tools and worked well across many sizes. As Swiss and American factories adopted interchangeable parts in the second half of the nineteenth century, the lever escapement became universal. The cylinder escapement lingered in cheaper watches, and the pin-lever, a simplified version with steel pins instead of jewels, powered inexpensive watches such as the famous dollar watches. But in any watch of quality, the lever ruled.
Why it won
The lever succeeded because it balanced competing demands. It was detached, giving the balance freedom for most of its swing. It was self-starting, so a watch would start running again after being stopped. It was safe, thanks to draw and a guard pin that prevented the lever from moving accidentally when the watch was jolted. And it was robust enough to survive being carried in a pocket, and later worn on a wrist, through the shocks of everyday life. No other escapement combined all these qualities so well.
The lever was not the most precise escapement ever designed. It was the one that worked best in the real world.
The lever’s long road
- c. 1755Invention
Mudge builds his first lever escapement.
- c. 1770Queen’s watch
Mudge’s lever watch for Queen Charlotte.
- 1780sEmery
A small series of lever watches in London.
- 1791Rack lever
Litherland’s patent in Liverpool.
- 19th c.Swiss lever
Club teeth, draw and machine production.
- 1999Co-axial
George Daniels’ alternative enters series production.