WatchShop Wiki
Articles · The NASA Tests of 1965WatchShop Wiki · Vol. 2

NASA tests · chapter 7

Why space is hard on watches

Vacuum

In the vacuum of space, there is no air to conduct heat. A watch in direct sunlight can heat up enormously, while one in shadow can become extremely cold. Lubricants can evaporate or freeze. Materials such as plastics can release gases. A watch that works perfectly on Earth may fail in these conditions.

Weightlessness

In weightlessness, a mechanical watch is in an unusual situation: the balance is not affected by gravity in any position, which in principle removes positional errors. But weightlessness also means that dust and small particles inside the watch float freely, which can interfere with the movement. Manufacturers took special care with cleanliness for watches intended for space.

Launch and re-entry

During launch and re-entry, astronauts experience strong acceleration and intense vibration. A watch must survive forces many times the force of gravity without its hands slipping, its balance being damaged or its crystal breaking. The NASA tests simulated these conditions precisely to find watches that could survive them.

Oxygen

The cabins of American spacecraft in the 1960s used an atmosphere of pure oxygen at reduced pressure. Pure oxygen is highly reactive and a severe fire risk, as the Apollo 1 fire of January 1967 tragically demonstrated. Equipment brought into the cabin had to be tested for its behavior in this atmosphere, which is why the watches were exposed to pure oxygen during the tests.

The crystal

The Speedmaster’s crystal was made of Hesalite, an acrylic plastic, rather than glass or sapphire. If an acrylic crystal breaks, it cracks rather than shattering into sharp fragments, which could float around the cabin in weightlessness and be inhaled or damage equipment. For this reason, the moonwatch kept its acrylic crystal long after sapphire became common in other watches.

The NASA Tests of 1965 · Space problems290