Swatch · chapter 6
Grenchen and the movement makers
The Swatch was born in a factory that made the movements for much of the Swiss industry. Its story starts with ETA.
A town of movements
Grenchen, in the canton of Solothurn at the foot of the Jura, became an important center of watch movement production in the nineteenth century. Several companies there made ébauches, the basic movements supplied to watch brands. One of them was Eterna, founded in 1856, known for its innovations in automatic winding. In 1932, Eterna separated its movement production into a new company, ETA, which became part of the Ébauches SA group.
The largest supplier
Over the following decades, ETA grew into one of the largest movement makers in Switzerland, and after the reorganization of the industry in the late 1970s and early 1980s, it absorbed many other movement makers. ETA supplied movements to a large proportion of Swiss watch brands, from inexpensive to luxury. Its mechanical movements, such as the 2824 automatic, became industry standards.
Ernst Thomke
Ernst Thomke, who became head of ETA in 1978, was an unconventional manager. Originally trained as a mechanic, he had also studied medicine and worked in the pharmaceutical industry before returning to watchmaking. He believed that the Swiss industry had to radically rethink how it made watches to survive. He encouraged his engineers to take risks and challenged the industry’s assumptions about cost and production.
Delirium
Before the Swatch, ETA demonstrated its capabilities with Delirium, launched in 1979. It was an ultra-thin quartz watch, less than two millimeters thick, in which the movement was built directly into the case back, eliminating the conventional movement base plate. It was a gold luxury watch, but the technique of integrating the movement with the case would be crucial for the Swatch.
From Delirium to Swatch
Elmar Mock and Jacques Müller took the principle of Delirium and applied it to a completely different product: a cheap plastic watch. By making the case back serve as the base plate, and by using plastics and automated assembly, they could reduce the number of parts and the cost dramatically. The result combined the most advanced manufacturing thinking with a playful, accessible product.