Observatory trials · chapter 5
Weeks of work for a single second
Choosing the parts
Preparing a movement for an observatory competition began long before adjustment. The régleur would select the best balance wheels and balance springs from many examples, measuring and comparing them until he found a pair that behaved well together. Pivots were polished to a mirror finish and checked under magnification. Jewels were selected and set with the greatest care. Every part that touched the oscillating system was inspected and, if necessary, replaced.
Poising the balance
One of the most important tasks was poising: making the balance perfectly balanced around its axis. Even a tiny excess of weight on one side would cause the watch to run differently depending on its position, because gravity would pull on the heavy point. The régleur placed the balance on a poising tool, a pair of polished jaws on which it could roll freely, and removed minute amounts of metal from the heavy side, or adjusted small screws on the rim, until it stayed still in any position.
Shaping the spring
The balance spring received equally careful attention. Its terminal curves, the shapes of its inner and outer ends, determine how evenly it breathes as it coils and uncoils. Using tweezers and fine tools, the régleur bent these curves by fractions of a millimeter, tested the result on a timing machine, and bent them again. Theoretical work by engineers such as Édouard Phillips in the nineteenth century provided guidance, but in practice the final shape was a matter of skill, patience and long experience.
Testing, adjusting, testing again
The movement was then tested for days in different positions and temperatures, and its behavior recorded. Each set of results suggested a new adjustment. The cycle could go on for weeks or months before the régleur judged the movement ready to submit. Some régleurs kept detailed notebooks of their methods, which they guarded jealously. Their art, combining science with an almost intuitive feel for the behavior of metal, was one of the highest forms of watchmaking skill.
A skill that survives
Although the competitions have ended, the techniques of the régleurs live on. Watchmakers who prepare high-grade movements, restore historic chronometers or compete in modern events such as the Concours International de Chronométrie, revived in 2009 at Le Locle, still use many of the same methods. The tools have improved, but the patience required has not changed.