WatchShop Wiki
Articles · Comex and the Helium Escape ValveWatchShop Wiki

Helium valve · chapter 8

The strangest dive watch of all

A different approach

Omega’s Seamaster 600, the PloProf, took an unusual approach to the problems of deep diving. Instead of letting helium out, it tried to keep it from getting in. The case was made from a single block of steel, a monobloc construction, with no removable caseback. The movement was inserted from the front, and the crystal was held in place by a heavy screwed ring. The seals were designed to be as tight as possible against helium.

A distinctive look

The PloProf’s design was unforgettable. Its large, cushion-shaped case was asymmetric, with a large crown protected on the right side. The bezel could be turned only after pressing a bright orange button, which prevented it from moving accidentally. The hands were large and highly visible, with a bright orange minute hand. The watch was big and heavy, more like a professional instrument than a piece of jewelry.

Tested by professionals

Omega tested the PloProf with Comex and other professional divers in the early 1970s. It performed well in saturation conditions, and Omega promoted it as a watch for the most demanding professional use. It was expensive and heavy, and it sold in relatively small numbers, but it earned a lasting reputation among divers and collectors.

Revived

Omega reintroduced the PloProf in 2009 in a modern version, with water resistance of 1,200 meters and a helium escape valve. Its unusual design continues to divide opinion, but it remains one of the most recognizable professional dive watches ever made.

Comex and the Helium Escape Valve · PloProf8