Railroad time · chapter 2
The morning of 19 April 1891
Two trains on one line
Kipton is a small village in Lorain County, Ohio, west of Cleveland. In 1891 it lay on the main line of the Lake Shore and Michigan Southern Railway, one of the busiest routes in the country, connecting Chicago with the East. On the morning of 19 April 1891, two trains were approaching Kipton from opposite directions. One was the Fast Mail, an express carrying mail between New York and Chicago, which had priority. The other was an eastbound accommodation train, a local passenger train that was supposed to wait at Kipton for the express to pass.
A watch that stopped
According to the investigations that followed, the engineer of the accommodation train was running on the basis of his watch, which had stopped for a few minutes and then started again. It was now about four minutes slow. Believing he had enough time to reach the next passing point, he did not wait. The two trains met head-on near the Kipton station.
The collision killed nine people, including both engineers and several postal clerks working in the mail cars. The wreck caused extensive damage and attracted national attention, partly because it involved the Fast Mail, a symbol of modern efficiency, and partly because the cause seemed so trivial: a cheap or poorly maintained watch.
Webb C. Ball
The railway responded by commissioning an investigation into the timekeeping practices of its employees. The man chosen to lead it was Webb C. Ball, a jeweler from Cleveland who had a reputation for accuracy and expertise. Ball had built his business partly on providing precise time to the public: he displayed a regulator clock in his shop window, set by telegraph time signals, so that passers-by could check their watches.
Ball found that the watches carried by railroad men were a mixed collection of every quality, often poorly maintained and rarely checked. He proposed a comprehensive system of standards and inspection, which was adopted first by the Lake Shore and then, with variations, by railways across North America. Ball was appointed general time inspector, and his system spread to cover a large part of the continent’s railway network.
The standards
The General Railroad Timepiece Standards, developed in the early 1890s, set specific requirements for watches carried by railway employees responsible for train movements. The details varied by railway and changed over time, but the core rules were clear. Watches had to be open-faced, with the winding crown at the twelve o’clock position, so they could be read quickly. They had to have at least seventeen jewels, a lever escapement and adjustment for temperature and several positions. They had to keep time within thirty seconds a week. The dial had to be white with bold black Arabic numerals.
One rule was especially important: the time had to be set by lever setting rather than by pulling out the crown. To change the time, the owner had to open the crystal and pull out a small lever beside the dial. This prevented the time from being changed accidentally when the watch was wound.
Inspection
Just as important as the specifications was inspection. Every employee’s watch had to be checked regularly by an approved inspector, usually a local jeweler, who compared it with a standard clock and recorded its rate on a card. If a watch was found to be inaccurate, it had to be adjusted or replaced. An employee whose watch failed inspection could be taken out of service. The system created a nationwide network of watch inspectors and gave jewelers a steady business.