WatchShop Wiki
Articles · The Accutron and the Tuning-Fork WatchWatchShop Wiki

Accutron · chapter 6

The engineer behind the hum

The Accutron was not the work of a famous watchmaker but of an electrical engineer who looked at watches with fresh eyes.

An outsider

Max Hetzel was born in Basel in 1921. He studied electrical engineering at the Swiss Federal Institute of Technology in Zurich and worked on electronics and radio. He was not a watchmaker by training, and this was perhaps his greatest advantage. When he joined Bulova’s Swiss subsidiary in Biel in 1950, he looked at the problem of timekeeping from the perspective of an engineer familiar with electronics rather than with traditional mechanisms.

The tuning fork idea

Hetzel knew that tuning forks were used as frequency standards in laboratories and that they vibrated at very stable frequencies. He realized that a small tuning fork, kept in motion by a transistor circuit, could serve as the oscillator of a watch. The transistor, invented in 1947, was a new technology, and Hetzel was among the first to see its potential in timekeeping.

The prototype

Hetzel built his first prototypes in the early 1950s. They proved that the principle worked, but turning the idea into a reliable product took years. The hardest problems were mechanical rather than electronic: converting the tiny vibrations of the fork into the rotation of the hands without losing accuracy, and manufacturing the extremely small parts required. The index wheel, with its hundreds of microscopic teeth, required new manufacturing techniques.

Bulova’s support

Bulova supported the project, investing heavily in research and development. The company’s president, General Omar Bradley, a famous American commander of the Second World War who had become chairman of Bulova, took a personal interest in the project. The Accutron was finally launched in October 1960 in New York.

Later work

Hetzel continued to work on electronic timekeeping. He later left Bulova and worked on other projects in Switzerland, including the development of quartz watches. He is remembered as one of the pioneers of the electronic watch and as a symbol of the Swiss engineering talent that helped bring electronics into watchmaking.

The Accutron and the Tuning-Fork Watch · Max Hetzel6