WatchShop Wiki
Articles · The Accutron and the Tuning-Fork WatchWatchShop Wiki

Accutron · chapter 7

Why the tuning fork was more accurate

Frequency matters

The accuracy of an oscillator depends partly on its frequency. A balance wheel in a mechanical watch of the 1950s typically oscillated at two and a half or three times a second. Any small disturbance, a shock, a change of position, a variation in the force from the mainspring, affected a significant part of each oscillation. A tuning fork vibrating three hundred and sixty times a second was much less affected by such disturbances, because each one was spread over many more vibrations.

Stability

The tuning fork was also less affected by position and temperature than a balance wheel. Its frequency depended on its material and shape, which Bulova chose and controlled carefully. The fork was made from a special alloy whose elasticity changed little with temperature. The result was a watch whose rate remained steady in almost all conditions.

Guaranteed accuracy

Bulova’s guarantee of accuracy within a minute a month was remarkable at the time, when most mechanical watches were expected to vary by much more. The guarantee was a powerful marketing message, emphasizing that the Accutron was a scientific instrument rather than a traditional watch.

The quartz comparison

A quartz crystal in a watch vibrates thousands of times a second, more than twenty times faster than the Accutron’s fork, and is even more stable. This is why quartz watches surpassed the Accutron in accuracy. But in 1960, the tuning fork was the most precise oscillator that could be fitted into a wristwatch at a reasonable cost.

The Accutron and the Tuning-Fork Watch · Accuracy7