WatchShop Wiki
Articles · The Man Who Hid the El PrimeroWatchShop Wiki

El Primero · chapter 8

Why five beats a second mattered

Faster balance

Most watches of the 1960s had balances oscillating at 18,000 or 21,600 vibrations per hour, five or six beats per second. The El Primero’s balance oscillated at 36,000 vibrations per hour, ten beats per second, or five complete oscillations. This high frequency gave it several advantages.

Precision

A balance that oscillates faster is less disturbed by shocks and changes in position, because each disturbance affects a smaller fraction of its motion. High-frequency movements tend to keep steadier time. In a chronograph, the high frequency also allows the stopwatch to measure intervals as short as a tenth of a second, since the seconds hand advances in steps of one tenth.

Challenges

High frequency also brings challenges. The escapement works harder and faster, which increases wear and demands better lubrication. The mainspring must deliver more energy to keep the faster balance going, which can reduce the power reserve. Zenith’s engineers had to solve these problems in designing the El Primero.

A rare choice

For decades, few manufacturers followed Zenith in adopting such a high frequency for a chronograph. When Rolex adapted the El Primero for the Daytona in 1988, it reduced the frequency to 28,800 vibrations per hour, partly to improve durability and service intervals. The El Primero’s high frequency remains one of its defining features.

The Man Who Hid the El Primero · High frequency8