WatchShop Wiki
Articles · The Accutron and the Tuning-Fork WatchWatchShop Wiki · Vol. 2

Article · The electronic age · 1953–1977

A watch that hums

Fig. 1An Accutron Spaceview of the early 1960s: no dial, just the tuning fork, coils and circuit visible through the crystal.

Hold an Accutron to your ear and you will not hear a tick. You will hear a faint, steady hum, the sound of a tiny steel tuning fork vibrating 360 times every second. When it appeared in 1960, it was the most accurate wristwatch ever made.

360 Hzvibrations per second
1960launch
1 minguaranteed maximum error per month
1977end of production

The limits of the balance

For three centuries, the balance wheel and spring had been the heart of the portable timepiece. The best mechanical wristwatches of the 1950s, carefully adjusted, could keep time to within a few seconds a day. But a balance wheel oscillates only a few times a second, and its rate is affected by temperature, position, magnetism and the state of the oil. There seemed to be a natural limit to how accurate a mechanical watch could be.

Electronics offered a way past that limit. Scientists and engineers had long known that oscillators vibrating at higher frequencies could keep time more accurately. Tuning forks, for example, vibrate at a very stable frequency, which is why musicians use them to tune instruments. Laboratory clocks using tuning forks and quartz crystals had existed since the 1920s and 1930s, but they were large and needed considerable power.

Bulova

Bulova was one of the largest American watch companies. Founded in New York in 1875 by Joseph Bulova, an immigrant from Bohemia, it had grown into a major manufacturer, with factories in the United States and Switzerland. Bulova was a pioneer in advertising: in 1941, it broadcast the first television commercial in the United States, a brief image of a Bulova clock and a map of the country. It was a company that liked to be first.

The engineer

The Accutron was the work of Max Hetzel, a Swiss electrical engineer who joined Bulova’s Swiss operation in Biel in 1950. Hetzel studied the Hamilton research on electric watches and concluded that simply adding electricity to the balance wheel would not produce a real advance in accuracy. Instead, in 1953, he proposed replacing the balance wheel entirely with a tuning fork driven by a transistor circuit. It was a radical idea. Bulova backed it, and Hetzel and his team spent years turning it into a product.

The Accutron and the Tuning-Fork Watch · Overview240