Railroad time · chapter 3
The great railroad watches
The new standards created a special category of pocket watch, built for accuracy, legibility and durability. American manufacturers competed fiercely to supply it.
A market worth fighting for
Railroads were among the largest employers in North America, and every conductor, engineer, fireman and many other workers needed an approved watch. The market was enormous and prestigious. A watch that met railroad standards was by definition a good watch, and manufacturers advertised the fact prominently. The major American companies, including Waltham, Elgin, Hamilton, Illinois and Ball, which commissioned movements from several makers under its own name, all produced railroad-grade models.
Famous models
Some of these watches became legends. Hamilton’s 992, introduced in the early 1900s and later improved as the 992B in 1940, was widely considered one of the finest railroad watches ever made and was produced in large numbers. Elgin’s B.W. Raymond, named after a Chicago mayor who was one of the company’s founders, was another favorite. Waltham offered models such as the Vanguard and the Crescent Street. Illinois produced the Bunn Special and the Sangamo Special. Ball sold watches marked Official Railroad Standard.
These watches shared a family look: white enamel dials with large black numerals, often with the minutes clearly marked in a ring, and sturdy gold-filled or nickel cases. Inside, they had high-grade movements, typically with twenty-one or twenty-three jewels, adjusted to temperature and to five or six positions. Many had a double roller, a refinement of the lever escapement that made it safer against shocks.
Rules that evolved
Railway standards changed over time as technology improved. Early requirements allowed both 18-size and 16-size watches, the two largest common sizes, and later rules favored the 16-size. The minimum jewel count rose from 17 to 19 or 21 on some lines. The dials were standardized further. Some railways approved specific lists of watches, so that an employee could buy one with confidence.
The arrival of the wristwatch
For decades, railroad standards required pocket watches, and many railroad men were proud of them. The wristwatch was considered less reliable and harder to read. After the Second World War, as wristwatch technology improved, some railways began to accept high-grade wristwatches that met specified standards. Electronic watches, such as the Bulova Accutron, were approved by some railways in the 1960s, and quartz watches later. The era of the great railroad pocket watch gradually came to an end, although some railroad workers continued to carry them well into the late twentieth century out of habit and pride.
A model for precision
The railroad standards had an influence far beyond the railways. They established the idea that a watch could be tested, certified and inspected against measurable criteria. They encouraged manufacturers to improve accuracy, durability and legibility. And they made the general public aware that a good watch was a precision instrument, not merely a piece of jewelry.
A railroad watch was not chosen for its looks. It was chosen because lives depended on it.
Railroad time · in detail
Typical requirements, 1890s to 1940s
Railroad standards varied from line to line and changed over time. This table shows typical rules for watches carried by train crews.
| Requirement | Typical rule | Reason |
|---|---|---|
| Case | Open face, crown at 12 | Fast reading, no lid to open |
| Size | 18 or 16 size | Large, legible dial |
| Jewels | At least 17 | Durability and precision |
| Adjustment | Temperature and five positions | Accuracy in all conditions |
| Accuracy | Within 30 seconds per week | Safe train operation |
| Setting | Lever setting | No accidental changes when winding |
| Dial | White, bold black Arabic numerals | Legible at a glance |
| Inspection | Regular checks by an approved inspector | Ongoing reliability |
Rules differed between railways; this summary reflects common practice.