WatchShop Wiki
Articles · The B-Uhr: Observation Watches of the Air WarWatchShop Wiki

B-Uhr · chapter 2

Anatomy of an observation watch

Type A

The first B-Uhr dials, introduced around 1940 and known today as Type A, had large Arabic numerals for the hours from one to eleven and a triangle at twelve, flanked by two dots, so that the navigator could orient the watch instantly. The minutes were marked by a track around the edge of the dial. The hands were large and filled with luminous material. A long central seconds hand allowed precise reading of the seconds.

Type B

In 1941 or 1942, a second dial layout was introduced, known as Type B. It reversed the emphasis. The outer ring of large numerals showed the minutes, in fives from five to fifty-five, with the triangle at the top, and a smaller inner ring showed the hours. The long minute hand reached the outer ring, the short hour hand the inner. For a navigator who needed to read minutes and seconds quickly, this layout made sense: the minutes were the most important information, so they were the largest.

Hacking seconds

An essential feature of the B-Uhr was the ability to stop the seconds hand, a function often called hacking. When the crown was pulled out, the balance was stopped and the seconds hand halted. The navigator could then set the watch exactly to a radio time signal and restart it at the precise moment. This allowed several crew members, or several aircraft, to synchronize their watches to the second.

The crown

The B-Uhr had a large crown, often called an onion crown because of its shape, which could be gripped and turned with gloved hands. In freezing temperatures at high altitude, airmen wore thick gloves, and a small crown would have been impossible to operate.

The movement

Inside, the B-Uhr used large hand-wound movements, originally designed for pocket watches, with a central seconds hand and a hacking device. Different manufacturers used different movements, some made in Germany and some in Switzerland. They were adjusted to high precision and tested before delivery. Some watches were tested at the Deutsche Seewarte, the German naval observatory in Hamburg, which had a long tradition of testing marine chronometers.

The strap

The strap was long, with a riveted construction and a large buckle, designed to go around the thick sleeve of a flight jacket. Today, B-Uhren are sometimes shown on straps that seem absurdly long for a bare wrist; in their original context, the length was essential.

The B-Uhr: Observation Watches of the Air War · The watch2