WatchShop Wiki
Articles · The Minute RepeaterWatchShop Wiki

Minute repeater · chapter 2

A royal dispute

Barlow’s invention

The repeating mechanism was developed in England in the 1670s and 1680s. The clergyman Edward Barlow, an inventive amateur, is credited with developing the rack-and-snail striking mechanism around 1676, first for clocks. The system used a cam shaped like a snail, which turned with the hour hand and whose steps corresponded to the hours. When the repeating mechanism was triggered, a rack fell against the snail, and the depth of the fall determined how many blows the hammer would strike. This allowed a clock, and later a watch, to strike the correct hour on demand.

Quare’s challenge

In 1687, Barlow sought a patent for a repeating watch. Daniel Quare, a leading London watchmaker, opposed the patent, claiming that he had developed a repeating watch himself. The dispute was referred to King James II, who tested the two watches. According to the traditional account, the king found that Quare’s watch could be operated more simply, with a single push-piece, and he decided in Quare’s favor. Barlow did not receive his patent. Both men are remembered as pioneers of the repeater.

The eighteenth century

Over the eighteenth century, repeating watches became a specialty of the finest makers in London, Paris and Geneva. Quarter repeaters were the most common. The watches struck on a small bell set inside the case, which made them thick. To protect the delicate mechanism and improve the sound, the cases were often pierced or decorated with engraving. Some repeaters were made as dumb repeaters, which struck on a block inside the case rather than a bell, so that the owner could feel the vibration without disturbing others, an advantage in church or at the theater.

The minute repeater appears

Minute repeaters appeared in the second half of the eighteenth century, as makers learned to add a third snail and rack for the minutes. They were rare and very expensive. Early examples were made by leading makers in London and on the Continent, and their complexity made them prized possessions.

Breguet’s gong

The bell inside the case was bulky. In 1783, Abraham-Louis Breguet introduced the gong spring, a coiled steel wire fixed at one end and running around the inside of the case. Struck by a hammer, it produced a clear, lasting tone while taking up very little space. The gong allowed repeaters to become much thinner and transformed their sound. It has been used in virtually all repeaters made since.

The nineteenth century

In the nineteenth century, the Vallée de Joux in Switzerland became the center of repeater production. Families of specialists in villages such as Le Brassus and Le Sentier made repeating mechanisms, which were supplied to the great houses of Geneva and elsewhere. Repeaters were combined with chronographs, perpetual calendars and other complications in grand complication pocket watches. They were sold to wealthy clients across Europe and America.

The Minute Repeater · Origins2