Helium valve · chapter 2
The smallest atom
A strange failure
Saturation divers wore dive watches, which were designed to keep water out at great depths. In the chambers, however, something unexpected happened. During decompression at the end of a saturation period, some watches suffered damage: their crystals were pushed out of the case, sometimes with a pop. The watches had survived the pressure of the deep, but they could not survive the return to the surface.
The explanation
The cause was helium. Helium atoms are extremely small, among the smallest of all atoms. Over days and weeks in a high-pressure helium atmosphere, helium gradually diffused through the gaskets of the watch and into the case, until the pressure inside the watch matched the pressure outside. A dive watch is designed to resist high pressure from outside. It is not designed to resist high pressure from inside. When the chamber was decompressed, the outside pressure fell faster than the helium could escape from inside the watch, and the internal pressure pushed the crystal out.
Two solutions
Watchmakers developed two approaches to the problem. One was to let the helium out safely. The other was to keep the helium from getting in at all.
The valve
The first approach was the helium escape valve, a small one-way valve set into the side of the case. When the pressure inside the watch exceeded the pressure outside by a certain amount, the valve opened and released the gas, protecting the crystal. Under normal conditions, the valve remained closed and sealed, keeping water out. Rolex, working with Comex, developed a helium escape valve and applied for a patent in 1967. Other manufacturers, including Doxa, developed similar valves around the same time.
The Sea-Dweller
Rolex introduced the valve in a new professional dive watch, the Sea-Dweller, developed with input from Comex divers. Early versions were made in small numbers from 1967, and the model was offered more widely from the early 1970s. The Sea-Dweller was water-resistant to a greater depth than the Submariner and had a thicker crystal and case. It became the standard watch of many saturation divers.
Keeping helium out
The second approach was taken by Omega, which in 1970 introduced the Seamaster 600, known as the PloProf, from the French plongeur professionnel, professional diver. Its case was made from a single block of steel, with no removable caseback, and its seals were designed to prevent helium from entering. Comex tested the PloProf, and it performed well. Its unusual design, with a large, asymmetric case and a locking bezel button, made it one of the most distinctive dive watches ever made.