WatchShop Wiki
Articles · The History of the Self-Winding WatchWatchShop Wiki

Self-winding · chapter 3

The watch repairer from the Isle of Man

The first self-winding wristwatch was the work of a British watch repairer who believed that a watch without an opening crown would last forever.

John Harwood

John Harwood was born in 1893 in Bolton, Lancashire. He served as an armorer in the British Army during the First World War, and afterward settled on the Isle of Man, where he worked as a watch repairer in Douglas. He noticed that many of the wristwatches he repaired had been damaged by dust and moisture entering through the winding crown. He concluded that a watch that did not need to be wound by hand, and therefore had no opening crown, would be much more durable.

The bumper

Harwood designed a self-winding mechanism for wristwatches in which a weight, pivoted at the center of the movement, swung back and forth through an arc as the wrist moved. Springs at each end of the arc, called bumpers, stopped the weight and sent it back. As it swung, the weight wound the mainspring. Harwood’s watch had no crown at all. The hands were set by turning the bezel around the dial.

Harwood obtained a British patent in 1923 and a Swiss patent in 1924. Unable to find backing in Britain, he went to Switzerland, where he formed a partnership with the watch manufacturer Fortis and others. Harwood watches went into production in 1926 and were sold in Switzerland, Britain and other countries.

Success and collapse

The Harwood watch attracted attention and enjoyed some success, but it faced obstacles. The bumper mechanism made a slight knocking sensation on the wrist as the weight hit its stops. Setting the time by the bezel was unfamiliar. The company had financial difficulties, and the Great Depression, which devastated the Swiss watch industry, finished it. The Harwood Self-Winding Watch Company collapsed in 1931.

The Autorist

Harwood did not give up. He also developed a watch called the Autorist, which used a different principle: the strap lugs were movable, and as the wearer flexed the wrist, the movement of the lugs wound the mainspring. A similar idea was used in the Rolls watch designed by Léon Hatot in France, in which the entire movement slid back and forth inside the case on tiny ball bearings, winding itself as it moved. These designs were inventive, but none became widely adopted.

A pioneer remembered

Harwood’s commercial ventures did not last, but his contribution was real. He produced the first self-winding wristwatch to be sold in series, and he demonstrated that the wristwatch’s constant motion made automatic winding practical. He died in 1964. A plaque on the Isle of Man commemorates his invention, and his watches are prized by collectors.

Harwood’s watch had no crown at all. To him, the crown was the door through which dust and water ruined watches.

Two centuries of self-winding

  1. c. 1770
    Perrelet

    A self-winding pocket watch is developed in Le Locle.

  2. 1778
    Sarton

    A rotor-type mechanism is presented to the Paris Academy.

  3. c. 1780
    Breguet

    Perpétuelles produced for aristocratic clients.

  4. 1923
    Harwood

    British patent for a self-winding wristwatch.

  5. 1931
    Rolex Perpetual

    A central rotor turning a full circle.

  6. 1942
    Bidirectional

    Rotors that wind in both directions appear.

  7. 1948
    Eterna-Matic

    The rotor runs on ball bearings.

The History of the Self-Winding Watch · Harwood3