WatchShop Wiki
Articles · The History of the Self-Winding WatchWatchShop Wiki

Self-winding · chapter 7

Five facts about automatic watches

  1. 1
    No crown at allJohn Harwood’s self-winding wristwatch of the 1920s had no winding crown. The hands were set by turning the bezel.
  2. 2
    Perpetual on the dialThe word Perpetual on Rolex dials refers to the self-winding rotor introduced in 1931.
  3. 3
    Five ballsThe five-dot logo of Eterna, later used by ETA, represents the five ball bearings of the 1948 Eterna-Matic rotor.
  4. 4
    Watch windersOwners of several automatic watches often use motorized boxes, called watch winders, that turn the watches to keep them wound.
  5. 5
    Still wound by handMost automatic watches can also be wound by the crown, which is useful when starting a watch that has stopped.

Comparison

Three ways to wind a wristwatch automatically

Bumper (Harwood, 1923)
Weight swings in an arc between spring stops
Full rotor (Rolex, 1931)
Weight turns 360 degrees on a central pivot
Micro-rotor (1950s)
Small rotor set into the movement for thinness
John Harwood’s self-winding wristwatch of the 1920s, with no crown on the case.
Fig. 1John Harwood’s self-winding wristwatch of the 1920s, with no crown on the case.

Why it matters

The automatic watch turned the wearer into the power source. Every step became a small turn of the spring.

The self-winding watch is one of the great success stories of horology. An idea that seemed impractical in the eighteenth century became, in the twentieth, the standard way of powering a mechanical watch. It took the wristwatch, the waterproof case and decades of refinement to get there.

When you put on an automatic watch in the morning and it starts ticking as you move, you are benefiting from the work of Perrelet, Sarton, Breguet, Harwood, Borer and many others who believed a watch could be made to wind itself.

The History of the Self-Winding Watch · Legacy7