WatchShop Wiki
Articles · Trench Watches of the Great WarWatchShop Wiki · Vol. 2

Trench watches · chapter 2

Built for the mud

From pocket to wrist

The typical trench watch was a small pocket watch movement in a case adapted for the wrist. Many had round or cushion-shaped cases of silver, nickel or other metals, with wire lugs soldered on to take a leather strap. Some were made by fitting existing small pocket watch cases with lugs. Others were designed from the start as wristwatches. The crown was usually at three o’clock, although some kept the pocket-watch position at twelve.

The watches came from many sources. Swiss makers such as Omega, Longines, Zenith, Moeris and many smaller firms supplied huge numbers. British jewelers and retailers sold Swiss watches under their own names. American firms, including Elgin, Waltham and Ingersoll, produced wristwatches for American and Allied soldiers. Some watches were cased in Britain with British hallmarks on Swiss movements.

Luminous dials

Much of the war was fought at night. Raids, patrols, wiring parties and attacks often began in darkness, and officers needed to read the time without showing a light that would attract enemy fire. Many trench watches therefore had luminous dials and hands, painted with a compound containing radium. The glowing numerals, often large and bold, are one of the most distinctive features of these watches. The dangers of radium to the workers who painted the dials were not yet understood, a tragic story told elsewhere in this volume.

Protecting the crystal

Watch crystals were made of glass, which broke easily. In the trenches, a cracked crystal soon led to a ruined watch, filled with mud and water. Manufacturers responded in several ways. Some watches had hinged metal covers, like a hunter pocket watch, which protected the dial when closed. Others were fitted with shrapnel guards, metal grilles that covered the crystal while allowing the time to be read through the openings. Unbreakable crystals made of celluloid or other early plastics began to appear, though they tended to yellow and crack with age.

Dials and hands

Trench watch dials were usually white enamel or later luminous black, with large Arabic numerals for legibility. The twelve was often printed in red, a common decorative touch. Hands were typically broad and filled with luminous paint. Some dials had a small seconds subdial at the bottom. The aim was clarity under difficult conditions, and the result was a style that influenced military and sports watches for decades.

Officers and men

Most early trench watches were bought privately by officers, who were expected to supply their own equipment. As the war went on, wristwatches became more widely available to non-commissioned officers and soldiers. Cheaper models, including some from Ingersoll and other mass producers, put wristwatches within reach of the ranks. Armies began to issue watches for specific roles, such as artillery observers and signalers, who needed accurate time to do their jobs.

Aviators

The new air services had particular needs. Pilots flying open cockpits at altitude, in freezing temperatures, needed watches they could read easily while wearing gloves and holding controls. Many pilots wore large wristwatches, sometimes strapped over their flying jackets. Watches were also fitted to the instrument panels of aircraft. The experience of wartime aviation fed directly into the development of pilot’s watches in the following decades.

Trench Watches of the Great War · The watches81